Today, motorists are actively using LED auto lamps that replaced incandescent lamps. They are usually used to illuminate signs on the body, as well as signs that are in the car interior.
Due to the high shock and vibration resistance, they can be operated in the most difficult conditions. Inclusion time is 50-70 nanoseconds. For comparison, the time for turning on the incandescent lamp is 200-300 Milisekund. LED lamps disperse power. The case almost never heats up. The lamps differ in a bright glow. These are the main advantages that LED auto lamps have.
In addition, they allow you to solve the problem with the burning of dimensions, lamps, turns, turn and feet signal.
According to the specialists of the Catalog/SvetodiDnye-Avtolampy portal. HTML, LED auto lamps are blocks that consist of parallel of connected LEDs. It is for this reason that when combustion of any LED, others continue to shine. Thus, the risk of emergency situations that may occur on the road is reduced.
By improving the technology of creating LEDs, as well as lamp design, many models that are not equipped with a current stabilizer show very good reliability results. Especially if they are used in the dimensions of the front headlights.
Many lamps today are created on SMD chips of 5050 latest generation. Compared to the previous generation, they consume similar power, but they have a brighter saturated white light, a high level of reliability and, of course, a long service life.
As for the spread of light in the bodily coal of LEDs, it is about 140-160 degrees. This indicator is much exceeding the old. The radiation characteristics of crystals, as well as the competent arrangement of matrices, contributed to this.
For cars, flexible self-adhesive moisture-disabled and inhospitable white-based tapes are also often used, which have SMD chips. Their length can be 0.5-5m. The advantages of LED tapes include the fact that they have a wide angle of glow. It is about 135 degrees. As for the effective service life, it is more than 80,000 hours. It is interesting that the tapes can be cut into arbitrary segments, which will be multiple of 5cm. At the same time, the functionality will not be lost. This type of tape will be perfectly suitable for illuminating ceiling niches, steps, cornices, floors, mirrors, paintings, as well as various stained glasses.