Prepare the walls, cleaning them of dirt and dust with water. The notch should be applied to the smooth surface so that it acquires roughness. Thus, clutch of the wall and plaster increase. In the event that the wall is not even with evenness should be removed. Next, moisten the wall if it is dry and proceed to plastering.
If you are planning to order an installation and maintenance of a security alarm in St. Petersburg, then we advise you to use the services of MaxCOMSPB. The installation and maintenance of security alarms is one of the priority areas of the company. The company performs the full range of services for the installation and maintenance of security alarms.
First install the beacons by which you will navigate while applying plaster. They should be at the same distance from each other. In addition, beacons should indicate the level of the surface of the future wall. When all the above processes are over, you can enter a solution for plaster. To do this, it is necessary to dilute the powder mixture with water and mix thoroughly, you can use the construction mixer. Then, using a special scapula, apply plaster on the wall. This must be done with sharp movements, making maximum efforts. Having applied a small layer, let it dry a little and start to grout the solution. To do this, smooth the plaster in circular movements. If you are hungry for the inner wall, it is recommended to apply a primer layer on top of the plaster. This is necessary so that the wall has a more even surface