To do this, cover the rib or a wide side of the control line with bedstream paint and move it on an arc 30-40 ° on a sawn strip. In this case, the stained sites are baked in the first place.
Turning the shaft gradually, the neck is sawed throughout the circle, focusing on risks and performing the above checks on the light slit and paint, as well as measuring measurements with a micrometer. Caliness check is carried out for paint according to the conductor. Covering the neck or conductor with paint, the conductor is rotated around the neck on the arc 45-60 °, pressing it to the neck, and fixed the place protruding on the neck. Straping with such checks continue until the second from the risk of risk at both ends of the neck throughout the circumference will become barely noticeable.
The seams on the ceilings will be completely invisible if you use the method of stretch ceilings. In fact, when pulling the canvas, a whole piece is used, so there will simply be no joints, only one continuous beautiful picture of your choice. You can order stretch ceilings in Samara today at very profitable prices.
After sawing the cylindrical part on all indigenous neck, fillets are sawn. Since sawing of the necks by risks is performed without the use of the indigenous bearings and the diameter, to which each neck should be sawn, it is already known at the beginning of their sawing, then before the end of the native Sheeches, they manage to restore and process the chisly bearings and put them in the nests. Therefore, as soon as the supporting of the rowing necks is completed, they begin to lay the shaft and, having previously filed the liners and adjusting the position of the shaft by the divergence of the cheeks, check the alignment of the indigenous necks and basic places by checking their radial beating. If at the same time it is found that the radial beating is slightly exceeds the permissible values (due to errors when applying scorks), then this is so much that the correction is carried out by sawing the necks on the goats, guided by the scenes and the results of checking the bargaining and basic places and, producing To do this, one or two lifts of the crankshaft, after which the indigenous neck is polished and the shaft is styled.