If it is necessary to save the apartment warmly as possible in the winter, then you will need not only to make the loggia glazed, but also you need to insulate it. Thus, not only the air temperature in the apartment will increase by 3-4 degrees, but the living area will also increase.
Urgently looking for a bus for rent? Rostransavto offers bus rental. By clicking on the link, you can choose a bus for yourself and getting the company’s contacts to place an order for rental.
In order to qualitatively insulate the loggia, it is advisable to use modern materials, because their effectiveness is much higher and at the same time their use will retain you more than more centimeters due to its compactness. In most cases, when thermal insulation of this type, foam is used, which is covered with aluminum foil. As a second layer in such a situation, a foam is used.
The process of insulation of the loggia, as a rule, begins with the floor. To do this, it is necessary to cover a bare concrete floor using thermal insulation material. After laying a beam with a section of 40 by 40 mm and a step – half a meter. At the same time, the gaps remaining between the bars should be shut tightly with strips of insulation. After perpendicularly, the next layer of bars on the first.
The walls of our loggia are insulated, gluing the stickers of the heat -insulating sheet on them. Penophol must be glued from foil. Thus, you get an effect resembling a “thermos”. A woodcite is fixed, sewing the heat -insulating material with dowels or self -tapping screws of sufficient length. The insulation ends with the finish.