In order to install the doors, whether they are wooden or iron first you need to make a door box. If the door is planned to be installed in a brick house, then it is necessary to make a door frame for brick walls, and accordingly prepare bars with a thickness of fifty centimeters and about ten centimeters wide wide. Between themselves, the boards are fixed using spikes at right angles.
Want to buy high -quality and reliable entrance doors? We advise you to buy Elbor Standard entrance doors, which are characterized by the highest quality of manufacture and reliability. Follow the link to familiarize yourself with the door models.
When installing doors, it is necessary to withstand the verticality of the side boards, as well as the horizontalness of the lower and upper boards. The door box is fixed using large nails or long steel pins. In brick or concrete walls, holes for wooden plugs are drilled before fixing the box, then nails or pins will be clogged in them. Thresholds are installed in the external doorways, they serve to go from a room in which there is no heating into a heated room. In another room, the floor can be slightly higher than in the corridor, in just such an increase will serve as a threshold. All of the above recommendations are more related to the installation of external doors. Internal interior doors differ from the outer doors only less weight. There is no lower board in the doorbox for the inner doors, that is, the threshold. The door boxes for interior doors are attached with nails, and then platbands are attached on top of them, which hide the space between the wall and the door box.
Before hanging the door, it must be adjusted by the size of the door frame. To do this, hang the door on the loops and mark the excess, and then cut the end side from below. The size of the door awnings is completely dependent on the size of the hung door. The door awnings are attached to the door leaf with screws, which should be firmly included in the holes of the loops. Screws of the screws should be filled flinted and not to protrude from the canopies. Door loops are made of two separate halves. The most convenient door hinges are loops that have removable rods. Loops are hemispherical and hinged.